11
uSING ThE BABy mONITOr
(6) User can also press <Menu> button once to exit the
pan/tilt mode.
4.12 Selecting a Camera Channel or scan
(a) Select Camera Channel
(1) On monitor mode, press and release [Camera] key,
currently viewing camera number will prompt out.
(2) Press and release [Camera] key again, then it will
switch to next registered camera unit from 1 to 4
and scan mode.
(3) It only switches to registered camera number, for
example, if two camera units are registered to cam
1 and cam 2, then every short press the key will go
to cam 1
→
cam 2
→
scan
→
cam 1 again.
(4) Press <Menu> button to confirm the selection.
(5) In each of the four camera channel, you can set all
other features individually.
(6) If only one camera registered, then short press this
key will no response.
(b) Scan Mode operation
(1) This function only turns on video for channels that
camera/s have been registered to.
(2) When switching to view each camera by <Camera>
key, there is a checked mark next to camera icon.
(3) This checked mark can change to cross mark by
using Up / Down arrow keys. It means the camera is
being turned off on scan mode.
(4) All cameras are possible to turn on or off individually.
(5) It is also effective not only in scan mode function,
but also applies to single camera view mode. In
other words, if you switch to that camera channel,
you must turn that video to on by <Up> arrow key
as well.
(6) When you switch back to single camera and VOX
mode is not selected during Scan mode the camera
will resume to the previous VOX setting status.
4.13 Video ON/OFF (Only audio monitor mode)
(a) User can turn off the screen but continue to hear
background sound from camera unit
(1) During video monitor mode, press and release < >
key, LCD is then turned off and receives sound from
camera (ie. only audio monitor mode).
(2) Speaker is always on during audio monitor mode
but VOX status is depending on user setting. If VOX
set to ON, then LCD will triggered to turn on by
camera sound level. If VOX set to OFF, then LCD
must be turned on by user pressing any key.
(3) User also can turned video on by pressing any key.
(4) If the unit is in scan mode when the screen is turned
off, the unit will keep scanning each camera in
the background. You will hear background noise
dependant on which camera is being scanned.
(b) Optional setting as quick enter to VOX mode
When unit is off, press the on/off button ( ) once to turn on
the unit. If unit is on, press and hold the on/off button ( ) key
for 2 sec, the unit is powered off.
OR013248 - Amend SC850 User Guide_01-26-16.indd 11
2016/1/28 8:37:48