9
Getting Started
Installation
Removing the Belt Clip
Pull the belt clip latch away from the radio.
While pulling the belt clip latch, push up the belt clip.
Installing the Belt Clip
Slide the belt clip into the slot.
A “click” indicates the belt clip is locked into position.
Installing the Batteries
WHEN USING RECHARGEABLE BATTERIES (not included) :
The charge time is about 12 hours, charging is indicated by a red
light on the top of the display and the battery meter indicators
flashing, once batteries are fully charged the red light will turn off.
Use 3 AAA 500mAH NiMH rechargeable batteries and 5V 1Amp
USB power adaptor.
NOTE: DO NOT CHARGE ALKALINE BATTERIES.
FOR USE OF NON RECHARGEABLE BATTERIES:
1. Slide down the battery compartment cover.
2. Insert 3 x AAA batteries (not included).
3. Position the batteries according to the polarity marking on the
battery compartment.
After placing batteries into correct positions, replace the battery
cover.
Notes:
• Use only the same type and make of batteries.
• Remove the batteries if the units will not be used for a long period of time.
