8
7
Attaching the belt clip (included)
Attaching the belt clip (2 included)
Hook the belt clip into the notch at
the top of the radio and slide
it down until it clicks into place.
To remove, squeeze the release
latch together and slide the clip up
and away from the radio.
Using your Oricom PMR655
Using your Oricom PMR655
Turning your radio on and off
To turn on, press and hold until a channel number
appears and the radio beeps.
To turn off, press and hold
until the display
goes blank.
Adjusting the volume
Press to increase or to decrease the volume.
The volume level icon
v
is displayed.
Select the desired volume level 1-15.
Selecting the channel
The channel is the frequency your radio uses to
transmit and receive.
1. Briefly press and release it - a confirmation tone
will sound and the current channel number will flash.
2. Press or to select a new channel.
3. Press PTT to confirm - a confirmation tone will sound.
Roger beep
The Roger beep tone is transmitted by your radio when
you finish transmission. In the same way as saying
"Roger” or “over", it lets others know you are finished
talking. You will hear this through the speaker when you
release the PTT button.
This feature can be turned on and off. For the
Roger beep function to be disabled, press and
together when turning the radio on. To enable the Roger
beep function reverse the procedure.
