background image

 
 
 
 

 

 

34

 
This telephone is not designed for making emergency telephone calls 
when the power fails.  Make alternative arrangements for access to 
emergency services. 
 
 

WARRANTY INFORMATION

 

This product is covered by a 12 month warranty against defective 
workmanship or parts.  The warranty does not extend to damage caused by 
misuse, negligence, excessive voltage, faults on the telephone line or 
lightning. This guarantee in no way affects your statutory rights. Full details 
of the warranty are contained in the enclosed warranty card. 
 
If you feel this product is not working correctly please consult the user 
guide and ensure that you are using the product in accordance with the 
instructions.  Remove all extra telephone equipment and connect only this 
telephone directly to the telephone socket. 
 
If the fault is still present, connect another telephone (if available) to the 
telephone socket. The results will show you whether the fault lies with this 
unit or with the telephone line.  
 
If the product is working correctly the fault is on the telephone line. Please 
contact your network operator for assistance.   
 
To order spare parts additional handsets, replacement batteries and 
in case of any technical issues you may have with product please 
consult our website for further information or send us an email for a 
prompt response to your enquiry.  
 
In the unlikely event of a fault developing, please contact us for 
assistance. If the product is then found to be faulty you will be 
asked to return it directly to us with a copy of the purchase receipt.  
 

Summary of Contents for P700 Series




































Reviews: