8
How to Use NFS100
1. Press
/mem button as illustrated.
2. All symbols are displayed on lcd when
started.
3. when ready symbol ( - - . - ) shows on
the display, thermometer is ready to
use.
4. Gently hold the NFS100 as illustrated.
Press and hold the scan button then
place the probe flat and firmly on the skin.
5. Slowly slide the probe midline across
the forehead to the hairline keeping the
instrument flat and in contact with skin.
you should scan the forehead slowly,
just like wiping the skin, for 3 seconds
and then release the scan button.
Measurement should start from center of
the forehead.
6.
The unit beeps one time (1) per second,
the final beep only occurs after the scan
button is released, the thermometer
should remain in contact with the skin
once the scan button is released until the
final beep is heard
.
7. Read the temperature on display.
8. As per cautionary notices on pages 4-5 you should allow 30
seconds between each new measurement.
9. The thermometer will automatically turn off after one minute
of no-use.
NFS100 user manual Jan 2014.indd 8
2015-1-21 09:13:43