- 10 -
Press and hold the "SET" button, then boot the enclosure, and release the SET
button after about 10 seconds, that is, the RAID mode is successfully set.
Note: After the RAID is successfully formed, a new hard disk will be generated. It must be
initialized and formatted before it can be used normally.
3549RU3、3559RU3 RAID modes
RAID 0(lower-lower-lower-upper) RAID 1/10(lower-lower-upper-upper)
RAID 3(lower-upper-upper-upper) RAID 5(upper-lower-upper-upper)
Span(Big)(lower-upper-lower-upper) Normal(upper-upper-upper-upper)
1
ON DIP
2 3 4
RAID 5
1
ON DIP
2 3 4
RAID 0
1
ON DIP
2 3 4
RAID 1/10
1
ON DIP
2 3 4
RAID 3
1
ON DIP
2 3 4
Span (Big)
1
ON DIP
2 3 4
Normal/ Clear
3529RU3 RAID modes
PM(upper—upper) RAID 0(lower—lower)
RAID 1(lower—upper) SPAN(upper—lower)
1
ON
2
PM
1
ON
2
PAID 0
1
ON
2
RAID 1
1
ON
2
SPAN/JBOB
（PS: White button is a function button）
（PS: White button is a function button）
