0818 IH-771VND
ORGAPACKOR 4000.13
2.
1.
Page 3 of 3
3.
4.
5.
Operating
3
Slide seal from the fron into the tool
up to the stop with the opening of the
seal facing outwards.
Fig. 1
–
Place the strap around the package.
Press level down to the stop. Insert
strap into seal, under cutter and clamp
plate. Release lever.
Fig. 2
–
–
Pull strap from dispenser and lead
around package. Insert strap into seal,
cutter and windlass.
Move the lever backwards and forwards
until desired strap tension is reached.
Fig. 3
–
–
Press button at the rear of the lever.
Do not hold button.
Use a little force (approx. 35 lbs./150 N)
to move lever backwards and forwards until
seal is completely closed. More force cannot
obtain a better closing but it can damage the
tool.
Fig. 4
–
–
Press lever down to the stop. Do not
hold button at the rear of lever. Turn
tool away from the seal.
Fig. 5
–
Maintenance note
Periodically lubricate all moving parts with
one or two drops of light machine oil.
