freedomRail Assembly Instructions
3 Drawer OBox
Installing Glides
Assembling/Inserting Drawers
1
2
3
Step 5: Separate Glides
Black Tab
Outer Glide
Attaches to Drawer
Attaches to OBox
Notched
End
Bumper
Step 6: Attach Outer Glides to OBox
Step 7: Mount OBox onto Uprights
Step 10: Attach Drawer Glides and Drawer Pull
Step 11: Insert Drawers
(a) Attach Sides to Back. (b) Secure with 1 5/8" Wood Screws. (c) Slide in Bottom.
(a) Lock cam by turning clockwise 1/4 turn. Turn until snug.
(b) Attach Inner Glides to Drawer with Euroscrews. Notched End should be at back.
(c) Attach Handle with Machine Screws.
(a) Position Drawer on Glides and push in Drawer completely. Repeat Steps 9, 10, 11, and 12
for (2) Small Drawers.
NOTE: To remove Drawers, push the Black Tab while pulling out the Drawer.
(b) Mount Nameplate to Drawer Front with Screws provided.
Screw in Connector Bolts and attach Front.
Mount OBox onto Uprights by inserting Hanging Brackets into the innermost track of each Upright.
Two people
recommended for installation.
Turn OBox on its side. Attach Outer Glides with Euroscrews. Install Outer
Glides in holes 1, 2, and 3. Repeat for other sides.
Inner Glide
(a) Pull out Inner Glide to expose Black Tab.
(b) Separate Inner Glide from Outer Glide by pushing the Black Tab while pulling Glide sections apart.
4
5
6
OBox Front
Bumper
Step 8: Attach Drawer Panels
OrganizedLiving.com
1-800-669-3225
June 2015
©
2015 Organized Living
Bloomington, IN 47403
2
Step 9: Attach Front Panel Connectors
