Page 4 of 9
1 Opening the case
Remove the lid from the case by removing the screws
from the top plate and upper row of the small side
plates.
3
Place the bottom panel on the floor as on the above
picture.
Front side of the cabinet downwards.
2 Cabinet Assembly
Place the screws for both side panels (Orfit logo on top)
in the foreseen metal inserts and tighten with a
screwdriver. Mount six screws on each panel.
4
On the bottom panel, make sure the arrows on the
locking inserts are pointing towards the side panels.
5
Mount both side panels to the bottom panel using a
rubber hammer. After that, use a screwdriver to lock
(clockwise) the inserts.
6
Mount the top panel in the same manner.
See above picture for orientation.