© 2018 OrePac Building Products. All rights reserved. OP-1118
WARNING:
Cancer and Reproductive Harm www.P65warnings.ca.gov
Step 1
Step 3
Connect the front and back panel to each side using the
2 1/2" lag bolts and hex nuts (A).
Attach the roof to the top of the front and back panels using
the supplied 1 1/4" wood screws (B). Repeat the process for
the other roof panel using the remaining screws.
NOTE:
there is a short wood cleat that will rest on the
two side panels to allow you to positions the panels.
OPTIONAL:
use wood glue to permanently fasten (not included)
NOTE: in order to protect the wood on your dog house, it is recommended
to apply a protective stain finish or clear coat at least once a year.
Insert the two floor panels into the dog house.
Attach the roof ridge to the roof panels using the supplied
1 1/4" wood screws (B).
Step 2
Step 4
