background image

 

TROUBLE SHOOTING TIPS 

 
Troubleshooting Tips 

1. 

If there is no video at output: 

 

Make sure the output resolution setting of source device can be displayed on all 
connected display devices. (4K@60 or 1080p@60) 

 

Reset the HDMI Splitter (disconnect from power supply and reconnect it after a min.) 

 

2. 

If there is video without any audio: 

 

Check the output audio mode if you're not sure of which audio format is supported 
by the display then select detection mode A (Highest Common Factor Mode) and 
reset the HDMI Splitter. Make sure the connection is in the HDMI standard. 

 

HDCP may not have been configured properly, please reset your HDMI Splitter by 
power on/off switch.

 

 

NOTICE 

 

  Manufacturer reserves the right to make changes in the hardware, packaging and any 

accompanying documentation without prior written notice. 

  The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are 

trademarks or registered trademarks of HDMI Licensing LLC in the United States and 
other countries. 

  Trademarks and brand names are the properties of their respective owners. 

  Dolby is a registered trademark of Dolby Laboratories. 

  DTS is a registered trademark & the DTS logos and Symbol are trademarks of DTS, Inc. 

 
 

Summary of Contents for UHD-PRO102

Page 1: ...auto down scaling function to connect a 1080p display to the splitter For the best performance and optimal use please read this manual carefully and keep it for further reference FEATURES AND CONTENTS Features HDMI 2 0 Ultra HD video format supported Supports up to 4K 60Hz 3D video format Pixel clock rate up to 18Gb s Supports output down scaling for 4K 60Hz content to 1080 60Hz display Dual EDID ...

Page 2: ...ections are completed and all the devices are switched on the HDMI source will be distributed to both displays and the LED in the front panel will lit to indicate each connected port For optimal performance please restart the HDMI splitter to ensure HDCP function work at its best whenever you switch out the HDMI source or display HDMI 3D video format Frame packing Side by Side Half Top and Bottom ...

Page 3: ...esoluton The audio format of the output is based on the TV s EDID B Priority Mode Copy the EDID of the first port The source device will set the output signal based on output 1 primary sink device When cascading multiple splitters to connect more displays from OUTPUT 2 and OUTPUT 1 is not being used Follow the system default EDID 4K 60Hz maximum resolution to 4K The audio format of the output is b...

Page 4: ...MI Splitter Make sure the connection is in the HDMI standard HDCP may not have been configured properly please reset your HDMI Splitter by power on off switch NOTICE Manufacturer reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or...

Reviews: