Oregon Scientific WS912, User Manual

Page: 6 / 77

3
1.
2.
Choose a massage mode when
READY
displayed on the screen. The LCD screen will
illuminate and confirm your selection.
To turn off the massage function, simply press
the button again. On the LCD screen,
READY
will blink while the massage mechanism
reverts to the original point and then it will turn
off.
USING THE MASSAGER
GETTING STARTED
FEATURES
Preparing the units for first time use -
The 3D Massage Seat with Heat comes with 2
screws located on the back of the unit to protect
the massage system during transportation. These
CONNECTING TO MAINS
Connect the DC jack to the power adaptor.
Connect power adaptor to mains
HANDLING THE REMOTE CONTROL
Retrieve the remote control to operate the 3D
Massage Seat with Heat.
Always store the remote control back in its holder
after use.
Press the POWER button to turn the unit on.
READY will display on the screen.
NOTE
Do not pull the power cord or wrap it around
the unit.
Do not sit on the power cord.
•
•
1.
2.
screws must be removed before the first use to
allow the unit function properly. Use the provided
allen key and dispose the screws appropriately.
When using the unit for the first time, you will hear
a “pop” sound. This indicates that the secure lock
for protecting the massage mechanism during
transportation is now unlocked. This only happens
when the unit is used for the first time.
3D massage seat with heat
Massage like therapist’s hands
3D shiatsu and rolling massage
Sensors adjust massage to body height
Strength control
2 pairs of 3D shiatsu and 3D rolling
massage heads
Full back, upper back, lower back and spot control
Auto detect of body curve and height to
provide a suitable massager mode
Heated massage heads with light indicator
15 or 20 minutes timer to protect the user
against over-use
2 level intensity control
Detachable seat cushion
Two programmed massaging modes
LCD display screen shows massager status
and timer
Auto detect of body curve and height to
provide a suitable massager mode
Heated massage heads with light indicator
Easy to use remote control with LCD
display screen
ROLLING
Press the INTENSITY button to select
your preferred massage speed (High or
low speed).
Shiatsu can be activated concurrently with
Heat program.
Press the
ROLLING
button on the
control panel.
Press the WIDTH button to adjust the
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3. Once the massage mode is selected, the
massage will begin.
To choose the massage mode:
SHIATSU
Press the SHIATSU button on the
control panel.
•
WARNING
The massage mechanism always returns
to the starting position when the massage course
ends and when the unit is turned off at the control
panel. If the electrical supply is interrupted, when
the power restores, the mechanism will go back to
the original point before a new massage begins.
On the LCD screen,
READY
will blink while the
massage nodes are returning. The apparatus will
turn off when finished. Press POWER again to
begin a new massage.
NOTE
EN
READY : Power on
SHIATSU / 3D ROLLING / ROLLING :
Massage function modes
MINS : Timer setting and minute countdown
SCANNING : Indicates scanning in progress to
set lower and upper range for massage heads.
INTENSITY : Shows HI / LO massage intensity.
move to the next available position.
ROLLING MODE : Rollers work slowly upward
and downward along your spine curvatures.
FULL BACK : Activates fullback massage.
UPPER BACK : Activates upper back massage.
LOWER BACK : Activates lower back massage.
HEAT
: Turns on / off soothing heat.
TIMER : 15 or 20-minute timer choices.
INTENSITY : HI / LO massage intensity.
1.
2.
3.
4.
5.
9.
10.
11.
12.
13.
14.
15.
2.
5.
1.
4.
3.
LCD DISPLAY