EN
4
REMOTE SENSOR
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4.
RESET
hole
NOTE
The sensor included in this package
(THN132NS) does not measure humidity.
GETTING STARTED
SET UP REMOTE SENSOR
1. Slide open the battery door.
2. Insert battery, matching the polarities (+ / -).
3. Press
RESET
.
4. Close the battery door.
TIP
Use alkaline batteries for longer usage and
consumer grade lithium batteries in temperatures below
freezing.
SENSOR DATA TRANSMISSION
To search for a sensor:
Press and hold
and
.
For best results:
•
Place the sensor within 100 m (300 ft) of the main
unit.
•
Position the sensor so that it faces the main unit,
minimizing obstructions such as doors, walls and
furniture.
•
Place the sensor out of direct sunlight and
moisture.
•
Place the sensor in a location with a clear view to
the sky, away from metallic / electronic objects.
•
Position the sensor close to the main unit during cold
winter months as below-freezing temperatures may
affect battery performance and signal transmission.
1
2
3
4
WMH90_M_EU_EN_R5.indd 4
11-7-27 下午4:56
P/N: 300100781-00004-10 REV 1
5/86
