EN
6
STRONG WEAK NO SIGNAL
The reception icon will blink when it is searching for a
signal. If the radio signal is weak, it can take up to 24
hours to get a valid signal reception.
RECEPTION SIGNAL
To force the sensor to search for clock signals:
•
Press and hold
SEARCH
on the sensor for 2
seconds.
Clock area reception indicator
:
ICON
DESCRIPTION
Connection between main unit and
sensor collecting signals
Sensor signal reception
Main unit has contacted sensor; time
is synchronised
Main unit has contacted sensor; time
is not synchronised
Main unit has lost contact with sensor;
time is synchronised
Main unit has lost contact with sensor;
time is not synchronised
Main unit cannot contact sensor
No icon Clock reception disabled
To toggle clock reception ON/OFF
:
1. Press
MODE / SNOOZE
to select Clock display
area. appears to indicate the area selected.
2. Press and hold
SEARCH SENSOR/ RF CLOCK
for
two seconds to enable / disable clock reception.
To force the clock to search for the sensor and
retrieve clock signals
:
1. Press
MODE / SNOOZE
to navigate to the Weather
display area.
2. Press and hold
MEMORY /
ON / OFF
for 2
seconds.
ICON
DESCRIPTION
Main unit searching for
sensor
Sensor channel has been
found
The sensor cannot be
found.
NOTE
If the sensor is still not found, check the batteries,
obstructions and remote unit location.
CLOCK DISPLAY
Rotate
MODE / SNOOZE
when clock display area is
selected to choose between the following display modes:
•
Clock with seconds
•
Clock with weekday
•
Calendar with weekday
•
Time offset clock with weekday
•
Alarm
BAR383HG_M_EN_R9.indd 6
4/12/06 5:24:14 PM
