EN
19
UV data is shown in the same area as the Barometer.
Press
SELECT
to navigate to the Barometer Area, then
press
MODE
to display the UV icon
and data.
Refer to the UVR138A User Manual for more
information and see below to learn about the new
additional UV features.
NEW ADDITIONAL UV FEATURES
UV EXPOSURE TIME COUNTDOWN
To set the exposure time countdown you need set to the
Skin Type and Sun Protection Factor (SPF) as follows:
1. Press
SELECT
to navigate to the Barometer Area,
then press
MODE
to select the UV display.
NOTE
2. Press
CHANNEL
to select user 1-4.
3. Press and hold
MODE
for 2 seconds to enter the
Skin Type Setting Mode of the selected user.
4. Press
UP
or
DOWN
to choose 1 of the 4 skin type
settings. Then press
MODE
to confirm and enter the
SPF Set Up Mode.
5. Press
UP
or
DOWN
to increase or decrease the
SPF
value. Then press
MODE
to confirm and enter the
UV Exposure Time Countdown Setting Mode.
6. Press
UP
or
DOWN
to enable or disable countdown.
Press
MODE
to exit the UV Exposure Time
Countdown Mode and start the exposure time
countdown. The remaining user UV exposure time
will display and the
will flash.
7. When the countdown has reached "0", an alarm will
sound for 2 minutes. Press any button to turn the
alarm off. The
icon will flash for 2 minutes even
if you have stopped the alarm sound.
MAXIMUM / MINIMUM MEMORY FOR UVI
To view the maximum and minimum memory for UVI:
1. Press
SELECT
to navigate to the Barometer Area.
2. Press
MODE
to select the UV display.
3. Press
MEMORY
to show maximum, minimum and
current UVI readings.
4. Press and hold
MEMORY
for 2 seconds to clear the
UVI memory.
BAR988HGA English R5
9/18/04, 3:00 AM
19
