7
EN
AC POWER ADAPTER
An AC power adapter is supplied for use with this
product. You must connect the power adapter if
you wish to use the continuous projection feature.
The jack is located on the bottom of the unit.
If the AC power becomes unavailable, the
unit will automatically switch to battery power.
CHANGE SETTINGS
Press and hold CLOCK or ALARM for 2 seconds
to enter setting mode. Then, press UP or
GETTING STARTED
BATTERIES
Batteries are supplied with this product. Replace them
whenever the low battery signal ( ) displays. The
battery cover is located on the bottom of the unit. Slide
to open. Be sure to match the correct polarity, as
shown in the battery compartment. After you change
the batteries, press the RESET button with the point of
a blunt object (such as a ball point pen).
Do not use rechargeable batteries.
