7
GB
RESETTING THE UNIT
The reset function is used to enhance synchronization of signals
after battery replacement or when the unit is operating in an
unfavorable way or malfunctioning. To activate this function, press
and hold the
MODE, ZONE, START/STOP (UP)
and
SPLIT
(DOWN)
buttons together for 2 seconds. All settings will return to
their default values.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
handled carefully.
- Though the watch is 50-meter water resistant, do not operate
buttons underwater nor wear it when snorkeling or diving.
- Though the watch is designed to withstand normal use, rough
usage or dropping the watch should be avoided.
- Avoid direct contact of the watch with chemicals like colognes,
sun block creams and other toiletries as this would cause
deterioration of the plastic parts of the watch. When the watch
comes into contact with such chemicals, remember to wipe it off
with it dry and soft cloth.
- Store the watch into its plastic container when not in use.
- Painted or silk-screened finishing on the watch may be discolored
and worn out by strong pressure, long-term rubbing as well as
frictions.
- Do not clean the unit with abrasive or corrosive materials.
- Do not subject the unit to snow or excessive force, shock, dust,
temperature or humidity.
- Do not tamper with the unit’s internal components.
TECHNICAL SPECIFICATIONS
Operating Temperature
: -20ºC to 50ºC
Radio Control
: Auto synchronizing time
and date by radio signal
generated from Germany
DCF 77
Clock format
: 24-hour format/ hh:mm:ss
2
nd
Zone time Hour-Offset
: +/- 12 hours
Date format
: dd:mm:with weekday
indication / Auto Calendar
from 2001 to 2098
Alarm Duration
: 1-minute crescendo
Stopwatch Function
: Up to 99 hours 59 minutes
59 & 99/100 seconds
Countdown Timer Function
: Up to 99 hours 59 minutes
59 seconds
Water Resistant
: 5 ATM (50 meters)
Battery Type
: 1 x CR1620 3V lithium cell
NOTE ON COMPLIANCE
Warming: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.