EN
10
Rising
Steady
Trend
Falling
ICON
NOTE
RESET SYSTEM
The
RESET
buttons are located in the battery
compartments for the main unit and remote sensors.
Press
RESET
when you change the batteries and
whenever performance is not behaving as expected (for
example, unable to establish radio frequency link with
remote sensor or radio-controlled clock).
When you press
RESET
, all settings will return
to default value, and you will lose all stored information.
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcohol-
free mild detergent. Avoid dropping the product or placing
it in a high-traffic location.
To auto-scan between sensors, press and hold
CHANNEL
for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
MEM
or
CHANNEL
.
If you use a sensor that collects only
temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press
MEM
to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold
MEM
for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown near the Temperature and
Humidity readings.
NOTE
RMR612HGA lab test R2
1/17/04, 4:58 PM
10