7
GB
ABOUT THE ALARM
This unit is equipped with 2 daily alarm functions.
To set the alarm,
1.Press [
] to change to the alarm-time display mode.
2.Press [
] again to select ALARM-1 or ALARM-2.
3.Press and hold [
] for 2 seconds.
4.Use [
▲
] / [
▼
] to enter the hours.
5.Press [
].
6.Use[
▲
] / [
▼
] to enter the minutes.
7.Press [
].
The alarm will be automatically activated. The [
] or [
] icon
will appear. To deactivate the alarm, press [
▲
] / [
▼
] when the alarm
time is displayed.
HOW TO USE THE DAILY ALARM
An alarm will go off for 2 minutes in two stepped crescendo patterns
if not cancelled. The [
] icon will flash and the back-light will be
activated for 5 seconds. To mute the alarm, press any key. Pressing
[
SNOOZE
] will activate the snooze function.
SNOOZE FUNCTION
When the snooze function is activated, the alarm will be muted
temporarily and set off again after 8 minutes. To disable the snooze
function, press any key (except [
SNOOZE
] ) when the alarm
goes off. Alternatively you can press and hold [
SNOOZE
] for
3 seconds when the snooze function is on.
INDOOR TEMPERATURE DISPLAY
This unit is capable of measuring the indoor temperature within a
range of
-5
°
C to +50
°
C (23
°
F to 122
°
F).
To display the temperature, press [TEMP]. To change the
temperature display unit, press and hold [TEMP] for 2 seconds to
toggle between degree Celsius (
°
C) or degree Fahrenheit (
°
F).
If the temperature goes below or above the range measured, the
display will show "LLL" or "HHH" respectively.
KEY-LOCK FUNCTION
To lock all key operations when travelling, press and hold both [
▲
]
and [
▼
] buttons for 2 seconds. The key-lock icon [ ] will appear
and all key functions (except [RESET]) will be locked.
To unlock, press and hold both [
▲
] and [
▼
] again for 2 seconds.
The key-lock icon [ ] will disappear.
THE RESET BUTTON
The [RESET] button is used to reactivate synchronization of signals
after battery replacement or when the unit is malfunctioning. Use a
blunt stylus to hold down the button. All settings will return to their
default values.
