9
EN
ADJUSTING THE ALARM TIME
To adjust the Alarm Time, make sure that or alarm displays
first.
Diagram
Instructions
1. Press and hold ALARM button.
Adjust the hour. Press ALARM
again when done.
2. Adjust the minute. Press ALARM
when done.
#1
#2
ADDITIONAL FUNCTIONS
RESET HOLE
If the clock behaves strangely or stops responding, insert and
press a blunt stylus into the clock’s Reset Hole. The clock will
then be reset to its original factory setting.
BACKLIGHT INTENSITY LEVEL
Press and hold Snooze/Light to select the Backlight Intensity
level (Lo or Hi). Then, press + or – on the Mode Switch to toggle
between the two settings.
NOTE Choose “Lo” to conserve batteries during the daylight,
while “Hi” is best during nighttime when additional backlight
intensity is needed.
2. indicates that the 1st
alarm display is now shown.
Press + or – on the Mode
Switch to toggle the 1st
alarm on (Figure #1) or off
(Figure #2).
3. Press ALARM to display
the 2
nd
alarm . Toggle
the alarm on or off using +
or – on the Mode Switch.
4. Press the Mode Switch
anytime to exit alarm
mode.