E
N
9
3. Click on
Screen Saver
tab in the
Display Properties
dialogue box.
4. Click on
Power
located at the bottom half of dialogue
box.
5. In new dialogue box
Power Options Properties
, click
on
Power Schemes
tab.
6. In
Settings for Timers off (Presentation) power
scheme
section, under
System Standby
option,
choose
Never
in drop-down list.
7. Click
Apply
and then click
Ok
.
8. Previous window will return. Click
Ok
to confirm and
exit.
TO DiSABLE SLEEP MODE ON COMPUTER
(WiNDOWS viSTA)
. Right click on
Desktop
.
2. In context menu, click on
Personalize
.
3. Click on
Screen Saver
link in the
Personalize
appearance and sounds
dialogue box.
4. Click on
Change Power Settings
located at the bottom
half of window.
5. Select
High Performance
and click
Change plan
settings
link.
6. Click
Change advanced power settings
link.
7. Click on
next to
Sleep
, in sub menu, click on
next
to
Hibernate after
.
8. Click
Setting
link and select
Never
in drop-down list.
9. Click
Apply
and then
Ok
.
UPLOAD DATA TO PC SOFTWARE
You can choose to upload the temperature and humidity
data by connecting the main unit to your PC via the USB
cable.
NOTE
The USB is only used for uploading temperature
and humidity data. It cannot be used for charging battery
power.
. After successful installation, double click on desktop
shortcut.
2. Click Display in Oregon Weather Station dialogue box.
3. You will be prompted to select model number. Please
select your model in the drop-down list and refer to the
image next to your selection to confirm it is the correct
model.
4. Plug one end of the USB cable into the main unit’s USB
port and the other end into the PC’s USB port. Main unit
will show “
”.
5. Uploading will start immediately. If USB cable
is not properly plugged, main unit will show
“
”.