background image

8

GB

SPECIFICATIONS

Operating Temperature : 0°C  to 50°C

Clock Functions

Radio  Control

: Auto synchronize current time and

date by DCF77 radio signal generated
from Frankfurt, Germany

Calendar

: Weekday in English / German /

French / Italian / Spanish
Current day / month format

Clock Time

: 24-hour  format

Alarm Duration

: 2 minutes crescendo

Snooze

: 8  minutes

Accuracy

: +/-0.5 second/day

(when RF is disabled)

Temperature Measurement

Indoor  Measurement

: -5°F  to +50°F

Temperature Resolution :  0.1°C

General Specification

Battery  Type

: Two (2) UM-3 or “AA” size

1.5V battery

Unit  Dimension

: 116 x 150 x 42 mm

(H x W x D)

Unit Weight

: 240g (without battery)

NOTE ON COMPLIANCE

Warning:   Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

R&TTE Compliance Note

This device complies with the essential requirements of Article 3 of
the R&TTE 1999/5/EC Directive, if used for its intended use and
that the following standard(s) has been applied:

Electromagnetic compatibility (Article 3.1.b of the R&TTE
Directive)

Applied  standards

ETS 300 683 : 1997

Efficient use of the radio frequency spectrum (Article 3.2 of the
R&TTE Directive)

Applied  standards

EN300 220 –1 : 1997

INTENDED USE OF THE DEVICE

Summary of Contents for RM329P










Reviews: