E
N
5
Water staying at position 1-4 means
the gauge is not leveled.
3. Use the metal ring to adjust the leveling of the rain
collector.
4. Remove the fiber tape from around the bucket
assemblies.
NOTE
Each time the battery in the main unit is
changed, repeat rain collector setup steps 1-4 before
use.
RAINFALL
Today’s rainfall appears on the 1st line of the display
and total rainfall is shown on the 2nd line. Press
IN /
MM
to toggle between inches and millimeters.
RAINFALL HISTORY
The rainfall history is displayed on the second line of
the LCD display. The main unit can record and store up
to nine days of rainfall.
To display the record for a particular day:
Use
HISTORY / UP
to toggle between daily rainfall and
rainfall history over the past nine days. The day of the
record will be displayed with a minus (-) sign. Zero (0)
means the record is for the current day.
To clear the current day’s rainfall:
Press and hold
SINCE
for two seconds. Note that this
will also clear the total rainfall record.
CAUTION
Other sensors using the 433 MHz
transmission frequency may influence the rainfall
reading. Please avoid placing those sensors too close
to the unit.
TOTAL RAINFALL
The total rainfall is displayed on the 1st line of the LCD
display.
To display the commencing date of the total rainfall
1
2
3
4
RGR682_M_EN_R1.indd 5
2006.8.2 10:18:51 AM
