![Oregon Scientific RESONANCE CIR600 User Manual Download Page 3](http://html.mh-extra.com/html/oregon-scientific/resonance-cir600/resonance-cir600_user-manual_1648902003.webp)
EN
1.
Volume up; Increase a value in setting mode.
2.
Volume down; Decrease a value in setting mode;
3.
Set the alarm; Activate/Cancel the alarm;
4.
Activate Bluetooth pairing mode; Toggle between Bluetooth and
Aux in audio mode.
5.
Toggle display mode between time and calendar;
Set the time/calendar.
6.
SNOOZE
Snooze the alarm; Dimmer
7.
DC 12 V, 2.0 A
jack Connect AC/DC adapter.
8.
5 V, 1A USB
port Charge smart device; Firmware update.
9.
Aux in
Connect to external audio source.
10.
RESET
Returns all settings to factory defaults.
11. Battery compartment: for back-up power source
.
LCD DISPLAY
B
A
A. Time / Calendar display.
B. Second / Weekday display.
Symbol
Description
Low battery indicator
Alarm indicator
Bluetooth icon
Aux in
POWER YOUR CLOCK
INSTALL BATTERY
The device comes with a back-up battery installed. Remove the plastic tab
before using the clock. Replace the battery when
displays.
1. Screw off the battery compartment cover.
2. Insert a new CR2025 3 V battery, positive (+) side up, and replace the
battery compartment cover.
3. Press
RESET
.
NOTE
• Keep button-cell battery away from children. Swallowing a button-cell
battery can be fatal.
CONNECT POWER ADAPTER
Connect the supplied AC/DC power adapter to the
DC 12 V, 2.0 A
jack on
the rear of the unit and plug into a standard outlet.
NOTE
• The battery is only for back-up use. Always connect the unit to the
power grid source via power adapter.
• When the clock is connected to AC power source, it can charge your
smart device via the USB port.
• Make sure the adapter is not obstructed and is easily accessible to
the unit.
• To completely disconnect from power, unplug adapter from the mains.
SET THE CLOCK TIME
1. Press and hold
for 3 seconds to enter the clock time setting mode.
2. Press
or repeatedly to adjust settings; press and hold or
to quickly setting.
3. Press
to confirm and go to the next setting.
• The setting order is 12/24 hour format > Hour > Minute > Year >
Calendar format (MD/DM) > Month > Day > Weekday language.
CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 3
2017/10/25 下午2:23