EN
4
ACCeSSORIeS – SePARATe PURCHASe
ReqUIRed
Optional wireless remote sensors such as those
listed below can be purchased separately. For more
information, please contact your local retailer.*
-THGR122N / THGN122N
- THGN132N
* Features and accessories will not be available in all
countries.
GeTTInG STARTed
ReMOTe SenSOR InSTALLATIOn
1. Step applicable only to THGR122N:
Using a Philips screwdriver, open the battery
compartment cover.
2. Slide channel switch to select channel 1. Ensure
you use a different channel for the other sensors
(2, 3).
3. Insert the batteries, matching the polarities.
4. Press
ReSeT
after each battery change.
5. Replace the battery compartment cover.
MAIn UnIT InSTALLATIOn
1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press
ReSeT
after each battery change.
The battery icon
may appear in the following
areas:
AReA
MeAnInG
Main unit
environment area
Main unit batteries low
Remote sensor
environment area
Remote sensor batteries
low
nOTe
•
We recommend that you use alkaline batteries with
this product for longer usage and lithium batteries in
temperatures below freezing.
•
Batteries should not be exposed to excessive heat
such as sunshine or fire.
SYnCHROnISInG And PLACInG SenSORS
The main unit will automatically search for new
sensor reset within the last 30 minutes. If unit failed to
synchronise with remote sensor, reset both the main
unit and sensor or try selecting a different channel (and
press
ReSeT
).
The remote sensor reception icons will show the following
status:
