EN
- 7 -
NOTE
• It takes 2-10 minutes to receive the clock signal. If the signal is weak, it could take up to 24 hours
to receive a valid signal.
• Not applicable to Asia and non-designated areas.
SET THE CLOCK MANUALLY
1. Press and hold
. The screen displays
ZONE
and the number flashes.
2. Press once or press and hold +/- to adjust the setting.
• For EU/UK, the time-zone offset sets the clock up to +/- 23 hours from the received clock
signal time.
• For US, the time-zone setting is Atlantic (A); Mountain (M); Pacific (P); Central (C); Eastern
(E); Newfoundland (N).
3. Press
to confirm.
4. Press once or press and hold +/- to adjust the setting for 12/24h hour format, hour, minute,
year, calendar format (month-day/day-month), month, date, temperature unit (°C/°F) , language
and daylight saving time (DST) (ON/OFF) for US.
5. Press
to confirm each setting.
NOTE
• The language options are English (
ENG
), Spanish (
SPA
), Italian (
ITA
), French (
FRE
) and
German (
GER
).
• The signal reception is on after each reset or battery replacement.
• While in the setting mode, press and hold to save the settings and leave the setting mode.
• The daylight saving time (DST) is set to OFF when the RCC is turned off, or when the time/
year, month or date is changed.
ALARM
SETTING/ADJUSTING ALARM TIME
1. Press and hold
.
2. Press once or press and hold +/- to adjust the hour and minute setting, then press
to
confirm.
3. Press
+
/
-
to toggle the weekday alarm
ON
/
OFF
, then press to confirm.
• The alarm rings only on weekdays when the setting is
ON
.
4. Repeat step 2 – 4 for alarm 2 setting.
TURN ON/OFF ALARMS:
Press to turn on/off the alarm in sequence:
Alarm1 > Alarm 2
> Both ON > Both OFF.
OPERATION
When the alarm rings, the backlight will flash. You may:
• Press to stop. The alarm will ring again on the next day.
• Press
SNOOZE | LIGHT
to snooze. The alarm rings again after 8 minutes.
