Oregon Scientific NanoActiv FS838, User Manual

Page: 13 / 54

EN
C. Hair Treatment
D. Sleep Mode
Attach the comb, the nozzle and the
extension hose to the mist outlet.
Press the key again to increase the mist
volume. Two LEDs above the key will light up.
Press the key during operation to switch
the device to standby mode. Otherwise
the device will switch to standby mode
after 5 mins the session is finished.
Hair treatment of 5 mins course is recommended for short or
middle length hair. One more course is needed for long and
more intensive treatment.
Comb your hair and start the hair treatment
Press the key to start the hair treatment.
One LED above the key will light up.
Each treatment lasts for 5 minutes.
Attach the nozzle to the device. Rotate
the nozzle to your desired direction.
Place the device on a level surface near the bed
so the mist can reach your target area. Adjust
the nozzle angle to what is comfortable for you
that is within 30cm from the target area.
Do not place the device on the bed as the device is
susceptible to being knocked over�
1.
2.
3.
4.
5.
1.
2.
13
BL101femUMb.indd 13 29/11/2011 19:05:24