EN
9
REMOTE UNIT SET UP
Up to 3 remote units can be used with this product to
monitor outdoor temperature and humidity. The
measurement unit (
°
C or
°
F) and channel number
(1, 2, or 3) switches are located in the battery
compartment, and should be set prior to installation.
Additional remote units sold separately. If
you are using more than one remote unit, be sure
to select a different channel number for each unit.
INSTALLATION
Mount the remote unit on a flat surface using the
recess holes on the back of the unit.
For best results:
·
Insert the batteries and select the measurement
unit and channel numberfirst.
·
Place the unit out of direct sunlight and
moisture.
·
Do not place the remote unit more than 20-30
meters (60 – 90 feet) from the main (indoor)
unit.
NOTE
