2
EN
1
3
2
4
8
9
5
6
7
10
KEY FEATURES - MAIN UNIT
FRONT VIEW / LCD SYMBOLS
BACK VIEW
1. Channel 1 / 2
z
Ch.1 or Ch.2 will appear when the related remote
nightlight sensor has been activated.
2. Alarm On Icon
z
Appears when the alarm is enabled.
3. AL
z
Appears when you are in the Alarm Display
Mode.
4. Alarm / Calendar (DD / MM)
z
Shows alarm time.
z
Shows the date in DD / MM or MM / DD format.
5. Time
z
HH / MM, 12 / 24 Hour, AM / PM.
6. Radio Frequency (RF) Reception Icon
z
Shows the strength of the reception signal.
7. Start
z
Start-time for the remotely controlled backlight
by nightlight with motion sensor.
8. Hourly Chime
z
Appears when the hourly chime is enabled.
9. Stop
z
Stop-time for the remotely controlled backlight
by nightlight with motion sensor.
10. Battery Low Icon
z
Appears when the 2 clock batteries are low.
11. Time Zone Offset / Day of the Week
z
Offsets the RF time setting when you are in a
different time zone (+ / - 23 hours).
z
Name of the day in 1 of 5 languages.
12. Temperature
z
°C / °F.
13. Light Icon with Battery Low Icon
z
Appears when the 2 main backlight batteries are
low.
1. Wall Mount Hole
2. Table Stand
3. Battery Compartment
z
Uses 4 x UM-3 / AA 1.5V batteries.
4. LIGHT button
z
Press to activate the clock backlight for 5
seconds.
5. MODE button
z
Press to toggle between 3 clock displays.
z
Press and hold to enter Clock Setting Mode -
time zone offset, 12- / 24-hour format, hour,
minute, year, DD / MM or MM / DD format,
month, day, day-of-the-week language and
hourly chime on / off.
6. ARROW UP and ARROW DOWN buttons
z
Press to increase / decrease the value of a
setting (in any setting mode).
z
Press and hold to activate / deactivate the radio-
reception (in normal Display Mode).
z
Press to activate / deactivate the alarm function
when the respective alarm is selected.
7. ALARM button
z
Press to toggle between 3 alarm displays.
z
Press and hold in the respective Alarm Display
Mode to enter its Setting Mode for the daily
alarm, clock Code for the remote nightlight
sensor or, the remote-controlled backlight start
and stop time.
8. °C / °F - Temperature
z
Slide to select between °C / °F display format.
9. RESET
z
Press to return all values to the default settings.
10. EU / UK switch
z
Slide to select your nearest radio signal base
i.e. England or Germany.
