E
N
8
For places elsewhere in the world, visit the website:
http://www.magnetic-declination.com
When you set the declination angle on the compass you
compensate for the difference between true and magnetic
north. This makes the compass reading more accurate.
To set the declination angle:
1. Press
DISP/-
repeatedly to navigate to compass mode.
2. Press and hold
SET
. Display will show CALI.
3. Press
DISP/-
to toggle to declination option. Display will
show DECLI.
4. Press
SET
to confirm.
5. Set the following options: on / off; West / East (only if
ON is selected); degree of declination angle by pressing
the following buttons:
•
to increase value or toggle options
•
DISP/-
to decrease value or toggle options
•
SET
to confirm
TRUE NORTH CALIBRATION
When you do not know the declination angle, the true north
calibration function can be used to compensate for the
difference between magnetic and true north. All you need
to know is the direction of true north (this can be found from
landmarks in your immediate vicinity). Setting the true north
calibration makes the compass reading more accurate.
To set True North calibration:
1. Press
DISP/-
repeatedly to navigate to compass mode.
2. Press and hold
SET
. Display will show CALI.
3. Press
DISP/-
to toggle to True North option. Display will
show NORTH.
4. Press
SET
to enter settings.
5. Press
to select on / off, then press
SET
to
confirm.
If ‘ON’ has been selected, rotate the unit to align direction
indicator to true north when prompted, then press
SET
to
confirm.
NOTE
If the declination angle is turned ON, the True north
function will automatically turn itself OFF and vice-versa.
GPS MODE
TIP
Go outdoors and move to an open area for best GPS
signal quality. Stand still when device searches for GPS
signal.
Press
DISP/-
repeatedly to navigate to GPS mode.
When in GPS mode, the device automatically searches for
GPS.
NOTE
Upon exiting GPS mode, GPS signal will remain
locked for 60 seconds to allow navigating to other modes.
will flash during search.