EN
15
CLOCK SETTINGS
To manually set the clock time and calendar when you
cannot receive the clock radio signals, or wish to manually
set the clock, you must select your own city as shown
below.
To change the clock settings:
1. Press MODE to navigate to any clock display.
2. Press and hold MODE for 2 seconds to enter setting
mode.
3. Use + / - to change the flashing setting.
4. Press MODE to confirm.
5. Repeat steps 3 and 4 to change all the settings. The
setting sequence is: main clock city, 12 / 24 hr format,
hour, minute, year, date / month format, month, date,
day of the week language and hourly chime ON / OFF.
NOTE
Press ALARM, ZONE, SIGNAL to confirm
changes and exit the setting mode at any time.
NOTE
The language options are (E) English, (D)
German, (F) French, (I) Italian and (S) Spanish.
NOTE
If the hourly chime is ON, a beep will be heard on
the hour, every hour.
NOTE
When travelling, it is advisable to change the main
clock to your new location and adjust the reception signal.
Fat 101_M_EN_V0.p65
2005.8.4, 4:01 PM
15
