9
EN
CLEAR RECORDS
NOTE
When total cost reaches 999.99 or total
energy reaches 999.99KWh, digits will flash to indicate
maximum has been reached and the need to clear
records.
To clear records of TOTAL data (Cost / Energy):
•
Press and hold
UP
and
DOWN
simultaneously.
RESET
Press
RESET
to return to the default settings.
TROUBLESHOOTING
PROBLEM
SYMPTOM
REMEDY
Strange
readings
Strange
readings
Set cost rate setting.
Check appliances are
not malfunctioning
(turned off by itself) as
this could be shown
as a sudden drop in
electricity usage.
High
readings
Check appliances
have been switched
off if not in use.
“- - - -“
displayed
Not
synchronised
Press and hold
CHECK
on remote
transmitter.
Then, press and hold
UP
on
the main unit.
If still unsuccessful,
press
RESET
on
transmitter and main
unit.
“0.00”
displayed
Problem with
the sensor
Check sensor clamp
has been properly
fitted and closed.
Possible damage in
the sensor clamp.
Replace clamp with
new one.
SPECIFICATIONS
MAIN UNIT
Dimensions
(L x W x H)
66 x 27 x 85 mm
(2.6 x 1.1 x 3.3 inches)
Weight
80 g ( 2.8 oz) without battery
Signal frequency
433 MHz
Transmission
range
30 meters (100 feet)
unobstructed
Information update
Approximately every 6 seconds
(EU) / 12 seconds (US / Canada)