EN
6
To reposition the sensors on screen:
1. On
STATION
screen, tap
.
2. Press and hold
at the right side of a sensor. Drag
it to your desired position.
3. Tap
to confirm.
SETTINGS
You can set your weather station through the application,
such as measurement units.
The settings are as follows:
• Temperature
• Barometric (not available in EMR211X)
• Rainfall (not available in EMR211X)
• Wind speed (not available in EMR211X)
• Altitude (not available in EMR211X)
• Show unavailable sensor
• Automatically sync time
•
Show Sea Level Pressure (not available in EMR211X)
To select the measurement unit:
1. Tap
to view the measurement unit options.
2. Tap on your desired unit.
3. Tap
to go back to the previous screen.
EMR211X_M_EU_EN_R7.indd 6
2018/8/15 下午4:29
