Oregon Scientific BL1211, User Manual

Page: 18 / 88

17
If there is residual
dirt, oil or gel on
the thermostat,
the thermal sensor
will not be able
to sense the
temperature correctly,
giving rise to risks of
low temperature burns.
After each use, please
clean with cotton bud
dampened with water.
Do not rub the
thermostat with
excessive force to avoid
damages. As it is made
of glass, there is a risk of
broken glass if rubbed
or impacted with force.
4. With the display side of the device facing away from
the body, place the device perpendicular the skin.
After applying sonic aqua gel on the skin, then place
the treatment head firmly on the skin.
5. Refer to “Treatment” on P.20-23, slowly glide the
device along the skin for 3 minutes.
—
If the skin appears to dry up while in use, please apply more sonic aqua gel.
ø When pressing the power-on button briefly, the device will “Pause” the timer,
pressing the button again will “Resume” the treatment.
ø When feeling hot, please continue to apply a little bit more of the sonic aqua gel.
If you still feel hot, please do not force with using the device on the same area.
You may continue using the device on a different part of the skin.
ø While in treatment, if a different mode is selected, the timer will restart at 3 minutes again.
6. After finishing the treatment, press and hold the Power-on button to power-off.
After continuous use of 3 minutes, a beeps can be heard in
succession to indicate the end of the treatment.
To end the treatment, press and hold on the Power-on button for more than 1
second to power-off. Should you wish to continue treatment on other parts, please
apply sonic aqua gel on the skin on those parts and repeat steps (2) - (5).
Each part can be treated once per day, not exceeding 3 minutes.
Precautions after Use
Maintenance
When maintenance is required, please ensure the device is power-off. If maintaining
with wet-tissues or towels while the device is power-on, there is a risk of shock.
Precautions after Use
“ Do not place this product in the following environments.
— This product is a precision instrument that contains electronic components.
Please do not expose this product to the following environments for
safekeeping, otherwise it may result in poor operation or malfunction.
Thermostat Do not wash with water.
The device will
malfunction. Please wipe
with dry cloth or a soft
cloth slightly soaked
with soap solution.
Do not wipe with alcohol, thinner, petrol or nail varnish
remover. This may cause the product to malfunction
or cracking or discoloring of the parts.
When there is dirt on
the protective cover,
please rinse with water.
In direct
sunlight
Dusty
environment
High
Temperature
variance
High
Humidity
variance
In open fire
Humid
environment
In storage
of volatile
matters
Near air-con
and heater
Place of
vibrations