5
EN
At first-time use, please full-charge the battery for 12 hours, and
then reset the parent unit before starting up. When the battery
is fully charged, it can be used cordlessly for up to 8 hours.
TURN ON/OFF THE PARENT UNIT
¥ To turn on press and hold the power button for 3 seconds.
¥ To turn off press and hold the power button for 3 seconds.
SETUP
Power up the Baby unit first and then the Parent Unit.
When first used, both units are already preset with same
channel (e.g., CH. 1).
Position the Baby Unit using either the recess hole on
the back or the table-stand. For best results:
¥ Place the units away from electrical or mechanical
objects.
¥ Place the units out of direct sunlight and moisture.
¥ Do not place the Baby unit more than 200 meters (656
feet) from the Parent Unit.
¥ Minimize obstructions such as doors, walls, and furniture
since this will decrease the transmission range between
the 2 units.
You may need to experiment with various locations to get
the best reception.
SELECT CHANNELS
You can change the channel if there is interference or
problem with linking the 2 units.
Baby Unit
Press and hold CHANNEL for 2 seconds. Use UP to
change the channel number from 1 to 10. Press CHANNEL
again or wait for 10 seconds to confirm.
Parent Unit
Press and hold CHANNEL for 2 seconds. Use UP/
DOWN to change to the same channel number as the
Baby unit s. Press CHANNEL again or wait for 10
seconds to confirm.
CHANGE VOLUME
Use UP/ DOWN on the Parent unit to change the volume.
There are 4 volume levels.
SOUND LIGHT INDICATORS
The sound light indicators can alert you visually to baby s
sound even when the volume is turned down. The louder the
sound received from the baby unit, more lights will be on.
RECEPTION SIGNALS
You can see if the status of the reception strength through
the reception strength tower icons.
LOST
LINK
Very
Weak
Weak
Normal
Strong
