EN
16
VIEW TEMPERATURE AND HUMIDITY AREA
Press
MODE
to navigate to the Temperature and
Humidity Areas.
Temperature data is given at the top; Humidity is below.
SELECT MEASUREMENT UNIT
Slide the
°C / °F
switch (inside the clock battery
compartment), to the setting you want.
SELECT SENSOR CHANNEL
Press
CH
to switch between sensors 1-5.
The house icon shows the selected remote sensor.
•
To auto-scan between sensors, press and hold
CH
for 2 seconds. Each sensor’s data will be displayed
for 3 seconds.
•
To end auto-scan, press
CH
or
MEM
with the
Temperature / Humidity Area selected.
If you select a sensor that collects only
temperature data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
•
Press
MEM
repeatedly to view current, maximum
and minimum records for the selected sensor.
•
To clear the records, press and hold
MEM
for 2
seconds. A beep will sound to confirm that the
memory has been cleared.
TEMP, HUMIDITY & PRESSURE TREND
TREND
RISING
STEADY
FALLING
TEMPERATURE
HUMIDITY
PRESSURE
NOTE
BAR826HG_UM_EN.P65
2005.3.8, 11:21 AM
16
P/N:086-003808-011 REV1
17/162