6
EN
CLOCK
The clock automatically synchronizes the current time
and date when it is brought within range of the radio
signal DCF77 generated from Frankfurt, Germany for
Central Europe (model BAR626) or MSF60 generated
from Rugby, England (model BAR626U).
NOTE
The signals are collected by the main unit when
it is within 1500 km (932 miles) of a signal.
Initial reception takes 2-10 minutes, and is initiated when
you first setup the unit, and whenever you press
RESET
.
Once complete, the reception icon will stop blinking. The
icon is shown in the Clock Area.
TURN CLOCK ON / OFF
Perform this step if you cannot receive clock signals.
Press and hold
for 2 seconds. Then, manually set
the clock following the "Set Clock" instructions (below).
To force a manual search for clock signals, press and
hold
for 2 seconds. If no signal is found, check the
batteries.
The signal icon indicates that the clock feature is
ON. No icon means that it is OFF.
STRONG SIGNAL
WEAK SIGNAL
NO SIGNAL
SET CLOCK / CALENDAR
You only need to do this if you have disabled the clock
feature (for example, if you are too far from or cannot
receive a signal).
1. Press and hold
MODE
for 2 seconds. The Clock Area
will blink.
2. Select the hour, minute, year, month, day, and day
of the week language. Press
or
to change
the setting.
3. Press
MODE
to confirm.
The language options are (E) English, (F) French, (D)
German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds and
Clock with Weekday display.
ALARMS
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press . The alarm time and alarm status will show
in the Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press
or
to
change settings. Press to confirm.
ACTIVATE ALARM
Press to activate or deactivate the alarm. shows
in the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm
will sound for 2 minutes. To silence the alarm:
¥ Press
SNOOZE
to silence it for 8 minutes.
OR
¥ Press any key except
SNOOZE
to mute the alarm
and activate it again after 24 hours.
If no button is pressed, the alarm will automatically
silence after 2 minutes. It will then sound again after 8
minutes.
