EN
9
TURN ATOMIC CLOCK ON/OFF
Perform this step if you cannot receive Atomic Clock
signals. Press and hold
DOWN
for 2 seconds. Then,
manually set the clock following the "Set Clock"
instructions (below).
SET CLOCK
You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1.
Press and hold
MODE
for 2 seconds. The Clock
Area will blink.
2.
Select the time zone, hour, minute, year, month,
day, and language. Press
UP
or
DOWN
to change
the setting. Press
MODE
to confirm.
The time zone options are (PA) Pacific,
(CE) Central, (MO) Mountain, and (EA) Eastern.
The language options are (E) English,
(F) French, (D) German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press
MODE
to toggle between Clock with Seconds and
Clock with Weekday display.
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF.
ALARMS
This product is equipped with a 2-minute crescendo alarm.
VIEW ALARM SETTINGS
Press
((.))
. The Alarm Time and
((.))
status will show in
the Clock Area.
SET ALARM
1.
Press
((.))
to switch to Alarm display.
2.
Press and hold
((.))
again for 2 seconds. The Alarm
settings will blink.
3.
Select the hour and minute. Press
UP
or
DOWN
to
change settings. Press
((.))
to confirm.
ACTIVATE ALARM
Press
to activate or deactivate the Alarm.
shows in
the Clock / Alarm Area when the Alarm is activated.
SILENCE ALARM
W h e n t h e A l a r m t i m e i s r e a c h e d , t h e
crescendo alarm will sound for 2 minutes. Press
SNOOZE
/
LIGHT
to silence it for 8 minutes.
Or, press to turn it off until the next day.
NOTE
NOTE
BAR618HGA lab test R4
2/18/04, 11:26 AM
9