EN
11
SELECT CHANNEL NUMBER
Press
CHANNEL
to switch between sensors 1-3.
The icon shows the selected sensor.
KINETIC-
WAVE
ICON
DESIGNATED
DISPLAY
Indoor
Display
Remote
Display
Channel
1
Remote
Display
Channel
2
Remote
Display
Channel
3
To auto-scan between sensors, press and hold
CHANNEL
for 2 seconds. Each sensor’s data will
be displayed for 3 seconds. To end auto-scan, press
CHANNEL
or
MEMORY
.
NOTE
If you use a sensor that collects only temperature
data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
To view temperature, humidity or UV Index current,
maximum (
MAX
) and minimum (
MIN
) records:
1. Press
CHANNEL
to select channel 1-3 or indoor.
2. Press
MEMORY
to view the selected channel’s
records.
Press
MEMORY
to toggle between current, maximum
(
MAX
) and minimum (
MIN
) records. To clear the records,
press and hold
MEMORY
for 2 seconds. A beep will
sound to confirm that the memory has been cleared.
ICE WARNING
The temperature range at which water begins to freeze
and turns to ice is approx. 37°F (3°C) to 28°F (-2°C).
It is during this period that ice becomes most slippery,
creating hazardous surface conditions dangerous for
travelling.
The BAR609HGA’s Ice Warning feature gives out
temperature readings to warn you when the temperature
is approaching freezing. If Channel 1 sensor falls
between 37°F to 28°F (3°C to -2°C), the freeze alert
icon will flash on the main unit display.
HEAT INDEX
Heat index is the temperature the body feels when
heat and humidity are combined. The temperature
you feel does not always correspond to the actual
air temperature and relative humidity. The heat index
(apparent temperature) is how hot the heat-humidity
combination makes you feel.
The BAR609HGA’s heat index feature advises 4 levels
of warning if the temperature is high.
BAR609HGA_EN OP.indd 11
8/22/06 5:17:10 PM
P/N: 086L003767-057 EN REV1
11/20
