11
GB
The radio reception signal [ ] and the outline of the US-Map icon
will start blinking to initiate reception automatically.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE/SET] for three seconds. The
hour digits will blink.
Hold and keep the respective button pressed to rapidly increase or
decrease the value of the hour digits.
Press [MODE/SET] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, year, month, day and
display language.
Note: The time and date are displayed in 12-HOUR clock format.
For the language display, you can choose among English (E), French
(F) and Spanish (s).
For the US time zone, select the time-zone by using the [ZONE]
button to toggle Pacific, Mountain, Eastern or Central.
If there is a setting you do not wish to change, simply press [MODE/
SET] to bypass the setting.
When you are done, press [MODE/SET] to exit. The display will
return to the mode last chosen.
HOW TO SET AND ARM THE ALARMS
The BAR122HGA has a daily alarm function.
To set an alarm:
1.
Press
[
]
once to enter the Alarm display mode.
2. Press and hold [
] for three seconds. The hour digits
will blink.
3. Enter the hour using [ TIME /
] or [ TIME /
] buttons.
4. Press [
]. The minute digits will blink.
5. Enter the minutes using [ TIME /
] or [ TIME /
] buttons.
6. Press [
] to exit. The [
] icon for the alarm chosen
will be displayed indicating the alarm set above is now armed.
You can also arm or disarm an alarm by pressing the
[ AL ] button.
When an alarm is armed, it will go off at the set time.
The four-step crescendo function allows the alarm to start off gently
and step up its intensity every 20 seconds for four times. Without
interruption, the alarm will sound for a total of two minutes. If no
key is pressed to turn off the alarm within these 2 minutes, the alarm
will sound once more after 8 minutes.
- Strong
- Weak
- No signal
- Receiving
b122hga-e.p65
08/10/2001, 12:17 PM
11
