5
GB
LOW BATTERY WARNING
When it is time to replace batteries, the low-battery indicator will
be displayed for the selected channel.
HOW TO USE THE TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand
w
hich when connecte
d
can support the unit on a flat surface. Or you can remove the stand
and
mount the unit on a wall using the recessed screw hole.
The remote sensor comes with a wall mount holder and a table stand.
Main unit
Wall-mount Table Stand
Remote unit
Wall-mount Table Stand
THE RESET BUTTON
This button is used when the unit is operating in an unfavorable
way or malfunctioning. To return all user programmed settings to
their original factory values, press [ RESET ] by using a blunt
stylus to hold down the button.
GETTING STARTED
Once batteries are placed in a given remote sensor unit, it will start
transmitting information at 40-second intervals.
For
approximately a 3-minute duration, the main unit will
automatically search for signals once batteries are installed. Upon
successful reception, the individual channel temperature reading
will be displayed on
the second line
and the respective humidity
reading on
the third line
. The main unit will automatically update
its readings at about 40-second intervals.
4 3 3 M H C A B L E F R E E
Z
CHANNEL
MEM
MODE / SET
M A X
M A X
T E M P
R H
1
1
