10
GB
Dimension
Main unit
: 161 x 87 x 28 mm
(L x Wx D)
Remote sensing unit
: 92 x 60 x 21mm
(L x Wx D)
NOTE ON COMPLIANCE
This product complies to standards and specifications of BZT, FCC
and article number 334 of PTT.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following meas-
ures:
SPECIFICATIONS
Temperature Measurement
Main unit
Indoor Temperature measurement
Proposed operating range
: -5.0°C to +50.0°C
(23.0°F to 122.0°F)
Temperature resolution
: 0.1°C (0.2°F)
Remote unit
Proposed operating range
: -20.0°C to +60.0°C
(-4.0°F to 140.0°F)
Temperature resolution
: 0.1°C (0.2°F)
RF Transmission Frequency
: 433 MHz
RF Transmission Range
: Maximum 30 meters
Temperature sensing cycle
: around 30 seconds
Power
Main unit
: use four (4) UM-3 or “AA”
1.5V alkaline battery
Remote sensing unit
: use two (2) UM-4 or “AAA”
1.5V alkaline battery
Weight
Main unit
: 189gm (without battery)
Remote sensing unit
: 70 gm
