9
GB
The temperature can be shown in Centigrade (°C) or Fahrenheit
(°F). Select the appropriate reading by using the [ °C / °F ] slide
switch (located in the battery compartment). Slide the switch to
°C for Centigrade or °F for Fahrenheit.
If the reading goes above or below the specified amounts, the
display will show a flashing "HHH" or "LLL".
This unit has an auto-scan function that can sequentially display
the indoor and remote readings. To activate this function, press
and hold the [ CHANNEL ] button for 3 seconds. To deactivate
press the [ CHANNEL ] button again.
NOTE ON °C AND °F
The outdoor temperature display on the main unit is dominated
by the selection on the [ °C / °F ] slide switch of the main unit.
Whatever the display unit of the remote sensor is, it will only
apply to the remote sensor itself and the temperature will be
automatically converted to the chosen one of the main unit.
MAXIMUM AND MINIMUM
TEMPERATURES & HUMIDITIES
The maximum and minimum recorded temperatures and
humidities will be automatically stored in memory. To display
them, press [ MEMORY ] . Press [ MEMORY ] again to alternate
between the maximum, minimum and current readings. The
respective MAX or MIN indicator will be displayed.
To clear the memory, press [ MEMORY ] and hold for three
seconds. The maximum and minimum recorded readings will be
erased. Subsequently, if you press [ MEMORY ] after the memory
has been erased, the maximum and minimum readings will have
the same values as the current ones.
TEMPERATURE & HUMIDITY TREND
The temperature and humidity trend indicator shows the trend of
temperatures and humidities collected at that particular sensor.
Three trends: rising, steady, and falling will be shown.
ATMOSPHERIC PRESSURE
The atmospheric pressure arrow indicator will indicate if the
atmospheric pressure is increasing, remaining stable, or
decreasing.
Arrow
indicator
Humidity
Trend
Steady
Falling
R i s i n g
Arrow
indicator
Temperature
Trend
Steady
Falling
R i s i n g