9
GB
HOW TO SELECT THE PRESSURE
UNITS OF MEASURE
The switch on the back of the barometer selects between
mb / hPa and inHg. To select mb / hPa , set the switch to mb
/ hPa. To select inHg, set the switch to inHg.
THE RESET BUTTON
If the unit does not operate properly, use a pointed object
to push the [ RESET ] button once, which is located on the
back of the unit.
LOW BATTERY SIGNAL INDICATION
If the voltage of the batteries becomes low, the ‘ BATT ‘
indicator will be displayed. Please replace the batteries
when the ‘ BATT ‘ indicator is displayed.
FREE STANDING OR WALL
MOUNTING
Stand:
Your Barometer comes with a built-in stand for tabletop
use. The back cover away from the back of the unit, ease the
plastic stand from its slot and swing the stand until it locks
into the bottom of the case. Replace the back cover.
Wall Mount:
On the back of the Barometer you'll find a recess hole for
wall handing. Place a screw ( or whatever device you
choose ) into the wall until the head extends a little more
than 4 mm from the wall. Place your barometer over the
screw in the hanger slot, until it locks into place.
2. SWING THE STAND
1. LIFT AND PULL THE
BACK COVER.
3. REPLACE THE BACK COVER.
