4
Mouse Connection
Cleaning and Maintenance
Starting The Hot Wheels
TM
Accelerator
1. Ensure the unit is turned OFF.
2. Plug the mouse into the mouse jack on the right side of the unit.
3. Turn the unit ON.
4. To ensure the mouse is kept clean, keep it on a clean mouse pad.
The unit should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the unit must not be used with the adaptor until the damage has been repaired.
Always disconnect the power supply before cleaning.
Wipe the unit with a dry cloth.
Do not get the unit wet.
Do not dismantle the unit.
Cleaning the Mouse
Use a philips screw driver to open the mouse-ball cover. Remove the ball and wipe it
and the inside of the mouse with a dry cloth. Then secure the cover with the screw.
Open the unit by pushing the safety catch located on the front of the unit.
Turn on
The
Hot Wheels
TM
Accelerator
using the [On] button
located on the lower left of the keyboard.
At the end of your session, remember to turn off the power
using the [Off] button
on the lower left of the
keyboard. (Attention:
The
Hot Wheels
TM
Accelerator
has no data storage capacity.)
Mouse Jack
Summary of Contents for 17078
Page 1: ...For Ages 5 UP For Ages 5 UP TM...
Page 2: ...TM TM TM...
