5
Operate
1. Check
the air purifier for the filters.
Be sure the supplied filters are properly
in place and all plastic is removed
before turning the unit on.
2. Place
the air purifier on a hard
surface such as the floor, a table
or desk. Be sure the grilles
are not blocked by other
objects, and there are no
candles or flames near the unit.
The air purifier can be placed in a
horizontal or vertical position.
3. Plug in
into nearest standard
electrical outlet that accepts a polarized plug.
4. Lightly Press
the power button to turn the air purifier on.
Press the power button again to turn the air purifier off.
5. Select
the fan speed. To select the speed, lightly press
and release the fan speed button until the desired speed is
reached.
L
= low, Silence Technology
®
,
M
= medium or
H
= high.
6. Adjust
the timer feature. The time can be selected from
two, four or eight hours. The unit will turn off once it runs
for the selected hours.
Note:
The unit will run continuously if all the timer lights
are off.
7. The Check Filter Lights
will light up when the filters may
need to be replaced. Press and hold the button for several
seconds until the filter indicator shuts off.
8.
Choose
to turn the Air Revitalizer feature on or off. Due to
the sensitivity of the smart panel, a slight delay may occur
for the electronics to respond.
IMPORTANT:
This unit is equipped with a smart panel that
senses your touch. Heavy pushing is not recommended.
3
4
2
5
8
6
7
horizontal position
vertical
position
