6|10
Orderman Dual Charger Sol
Orderman Dual Charger Sol
1.
Startup
Connect the dual charger as shown above. The output voltage for the
power supply is 5V. (Output of power supply 5V). Only use the Orderman
power supply.
Once the dual charger is connected to power, the self-test will begin. Both
LEDs on the device will flash red briefly and then green. If the self-test is
successful, both LEDs switch off.
If one or both LED(s) continues to flash after you have connected the
power supply, a malfunction has occurred in one or both charging slots.
Please contact our customer service.
Do not place the power supply and dual charger in direct sunlight.
For ventilation, make sure that you do not cover the power supply and dual
charger.
