Users manual
PICO 50+
22
9
REMOTE VENTILATOR CONTROL
Turning ventilator on/off
Ventilator speed setting: high-medium-low speed
respectively
Regeneration mode
The ventilator runs 70 seconds in the supply mode and the
next 70 seconds in the extract mode with heat regeneration
Ventilation mode
The ventilator runs exclusively in the supply or extract mode.
In case of installation of two ventilators the air flow direction
depends on the external wiring, refer the wiring diagram on
the page 12.
Timer control settings:
4 hours at high speed
8 hours at low speed
After completing the set countdown, the ventilator reverts
to operation with previous speed settings. Press any manual
speed button to turn the timer off.
