Users manual
PICO 50+
17
7.5
Wiring diagram for the ventilator with control panel with LCD display
Ventilation system management
The ventilation system is controlled by a control panel.
You can use the control panel to change the following parameters:
•
ventilator speed level: low, medium, high
Mode of operation - regeneration or ventilation
•
operation of the ventilation system on the basis of a timer, which enables the following operation:
4 hours at high speed or 8 hours at low speed.
The display shows the following parameters:
•
current speed
•
current mode of operation
•
timer-based operation status (
ON
/
OFF
)
•
filter replacement / service required according to filter timer (factory setting 90 days)
•
Switch off the ventilation system in the event of a motor failure
If the ventilation system is switched off, the set parameters are stored in the permanent memory of the
control panel.
