OR-444 Sound Bag Harness Setup Instructions
1.
Loosen the top vest straps all the way
2. Pull out the round buckles
on the waist belt, then
loosen the straps all the way
3.
Place the harness on your hips,
fasten the main buckle around your
wasit and pull the straps to tighten
6.
Connect the top aluminum ring to the front connection on your mixer case
NOTE: We recommend connecting it as far as possible from your body
7.
Connect the bottom aluminum ring to the front or rear D ring on your mixer case
NOTE: We recommend connecting it as far as possible from your body
10.
Adjust the straps on the top vest
(these should be comfortable, not tight)
8.
Push the trigger to release the spine
9.
Bend forward to lengthen the spine and shift the weight onto your hips,
then release the trigger to lock the spine in the desired position
11.
Adjust the straps on the waist belt
(these should be tight) in order to
distribute the weight onto your hips
NOTE: You can use the trigger to play with
the spine height while you work in order to shift
the weight distribution from shoulders to hips
4. Push and rotate the two round buckles
to put more pressure on your hips
5. Disconnect the top buckle
and roll up the top strap
NOTE: Use this strap only when
wearing the waist belt by itself
Top Vest
Waist Belt
Spine
1
2
2
3
3
4
5
6
7
10
11
8
9
1
1
1
1
1
www.ORCAbags.com
